Table of Contents
Advertisement
Connect video cables
Connect this Home Theater System to TV to
view disc play. Select the best video connection
that the TV can support.
•
Option 1: Connect to the HDMI jack (for
a HDMI, DVI or HDCP-compliant TV).
•
Option 2: Connect to the component
video jacks (for a standard TV or
progressive scan TV).
•
Option 3: Connect to the video (CVBS)
jack (for a standard TV).
Note
•
You must connect this Home Theater System
directly to a TV.
Option 1: Connect to the HDMI jack
HDMI IN
1
Connect an HDMI cable to the HDMI
OUT jack on this Home Theater System
and the HDMI input jack on the TV.
Note
•
If your device supports HDMI CEC, you can
control compliant devices with a single remote
control. (see 'Get started' > 'Use Philips
EasyLink').
HDMI OUT
Tip
•
If the TV has a DVI connection only, connect
via a HDMI/DVI adaptor. Connect an audio
cable for sound output.
•
You can optimise the video output. (see
'Adjust settings' > 'Video setup' > [HDMI
Setup] ).
•
This type of connection provides the best
picture quality.
Option 2: Connect to the component
video jack
Pr
VIDEO OUT
Pr
Pb
Y
1
Connect the component video cable
(not supplied) to the Y Pb Pr jacks on
this Home Theater System and the
COMPONENT VIDEO input jacks on the
TV.
•
If a progressive scan TV is used, you
may turn on the progressive scan
mode. (see 'Get started' > 'Turn on
Progressive Scan').
Note
•
The component video input jack on the TV
might be labeled as Y Pb/Cb Pr/Cr or YUV.
•
This type of connection provides good picture
quality.
Pb
Y
EN
11
Advertisement
Table of Contents
