Dell PowerEdge T360 Installation And Service Manual page 39

Table 42. HTTP Device n Settings details (continued)
Option
Protocol
VLAN
VLAN ID
Vlan Priority
DHCP
IP Address
Subnet Mask
Autoconfiguration
Prefix Length
IPv6 Address
Gateway
DNS info via DHCP
Primary DNS
Secondary DNS
URI (will obtain from
DHCP server if not
specified)
TLS Authentication
Configuration
Root Certificate
Configuration
NOTE: Autoconfiguration, Prefix Length and IPv6 Address options are visible only when Protocol is set to IPv6
Table 43. UEFI iSCSI Settings screen details
Option
iSCSI Initiator Name
iSCSI Device1
iSCSI Device1 Settings
Table 44. ISCSI Device1 Settings screen details
Option
Connection 1
Connection 2
Connection 1 Settings
Connection 2 Settings
Connection Order
Description
Specifies Protocol used for HTTP device. This option is set to IPv4 or IPv6. This option is set
to IPv4 by default.
Enables Vlan for HTTP device. This option is set to Enable or Disable. This option is set to
Disable by default.
Shows the Vlan ID for the HTTP device
Shows the Vlan Priority for the HTTP device.
Enables or disables DHCP for this HTTP device. This option is set to Enabled by default.
Specifies IP address for the HTTP device.
Specifies subnet mask for the HTTP device.
Enables or disables the IPv6Autoconfiguration for the HTTP Device. When set to Enabled,
IPv6 Address and Gateway are retrieved from the Autoconfiguration mechanism.
IPv6 Prefix Length (0~127) for this HTTP Device.
IPv6 Unicast address for this HTTP Device.
Specifies a gateway for the HTTP device.
Enables or disables DNS Information from DHCP. This option is set to Enabled by default.
Specifies the primary DNS server IP address for the HTTP Device.
Specifies the secondary DNS server IP address for the HTTP Device.
Obtain URI from the DHCP server if not specified.
Specifies the option for TLS authentication configuration. View or modify the device's boot
TLS Authentication Mode. This option is set to One Way by default. None means the HTTP
server and the client will not authenticate each other for this boot.
Import, delete, or export the root certificate.
Description
Specifies the name of the iSCSI initiator in IQN format.
Enables or disables the iSCSI device. When disabled, a UEFI boot option is created for
the iSCSI device automatically. This is set to Disabled by default.
Enables you to control the configuration of the iSCSI device.
Description
Enables or disables the iSCSI connection. This option is set to Disabled by default.
Enables or disables the iSCSI connection. This option is set to Disabled by default.
Enables you to control the configuration for the iSCSI connection.
Enables you to control the configuration for the iSCSI connection.
Enables you to control the order for which the iSCSI connections will be
attempted.
Pre-operating system management applications 39