EWM alpha Q 330 Progress puls HP MM TKM Operating Instructions Manual page 13

Risk of accidents due to incorrectly installed leads!
Incorrectly installed leads (mains, control and welding leads or intermediate hose
packages ) can present a tripping hazard.
•
Lay the supply lines flat on the floor (avoid loops).
•
Avoid laying the leads on passage ways.
The units are designed for operation in an upright position!
Operation in non-permissible positions can cause equipment damage.
•
Only transport and operate in an upright position!
Accessory components and the power source itself can be damaged by incorrect connection!
•
Only insert and lock accessory components into the relevant connection socket when the
machine is switched off.
•
Comprehensive descriptions can be found in the operating instructions for the relevant
accessory components.
•
Accessory components are detected automatically after the power source is switched on.
Protective dust caps protect the connection sockets and therefore the machine against dirt and
damage.
•
The protective dust cap must be fitted if there is no accessory component being operated on
that connection.
•
The cap must be replaced if faulty or if lost!
099-005402-EW501
29.06.2017
CAUTION
For your safety
Transport and installation
13