Advertisement
3 Usage
3.1
Using the Walker Holder
For this procedure, refer to FIGURE 1.
Reverse STEPS 1-3 to remove the walker holder.
1.
If necessary, loosen but DO NOT remove the mounting knob.
2.
Install the walker holder into the accessory tube.
3.
Install the mounting knob to secure the walker holder to the accessory tube.
4.
Loosen the adjustment knob.
5.
Adjust the walker holder to the desired height.
6.
Tighten the adjustment knob to secure the walker holder in one of four mounting holes.
7.
Fold the walker.
Walker MUST be folded before using walker holder.
8.
Hang the walker in the slot and use the strap to secure it.
Part No 1164889
Download from Www.Somanuals.com. All Manuals Search And Download.
Slot
Walker Holder
Strap
Adjustment
Holes
Adjustment
Knob
Accessory Tube
FIGURE 1 Using the Walker Holder
3
Mounting Knob
Walker Holder
Advertisement
