Product Information - Philips CSP1200 User Manual

4
Cut out the marked areaa and drill the bolt holes.
5
Connect the subwoofer to the amplifier.
6
Mount the subwoofer into the rear tray with the supplied screws.
Option 2: Install in a sealed enclosure
If the subwoofer cannot be mounted on the car, place it in a sealed
enclosure.
a
1
Make a sealed enclosure in dimension as below:
The box:
Height
Length
Width
The mounting hole:
Mounting hole diameter (Outside)
Mounting hole diameter (Inside)
Screw hole diameter
2
Connect the subwoofer to the amplifier (see step 5 of "Option 1:
Mount on rear tray" section).
3
Install the subwoofer into the sealed enclosure with the supplied
screws.
b

3. Product information

Note
• Product information is subject to change without prior notice.
CSP1000
338mm
522mm
232mm
CSP1200
358mm
568mm
238mm
CSP1000
257.3mm
231.9mm
3.3mm
c
d
C
CSP1200
307mm
283.7mm
3.3mm
e