Related Manuals for Philips CSP652/93
Summary of Contents for Philips CSP652/93
- Page 1 EN User manual CSP550 CSP650 CSP652...
-
Page 2: Environmental Information
2009 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. -
Page 3: Your Car Stereo Speakers
Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With the woofers and tweeters, you can enjoy high power music with vivid sound. What’s in the box... -
Page 4: Installation
A depth of at least 49mm is required to mount the woofer and a depth of at least 19mm is required to mount the tweeter. Measure the depth of the area where you are to mount the woofer/tweeter, and ensure that the woofer/tweeter does not obstruct any other components of the car. - Page 5 Turn off the car ignition key. If the power is on, the click noise generated by the connection • may damage the speakers. Cut out the mounting template from the packing box and paste it on the location selected for mounting the woofer. Mark the cut-off hole and the 4 bolt holes.
- Page 6 Mount on the speaker as shown below. Press and insert the edges of the grille net. • The speaker grille can be mounted without the grille net, if you like. Option 2: Mount on dashboard or rear tray You can also mount the woofers into the surface of the dashboard or rear tray.
-
Page 7: Mount The Tweeter
Mount the Tweeter Follow steps mentioned in “Mount the woofer” section to mount the tweeters. Option 1: Option 2: Flush mounting Flush mounting Option 3: Option 4: Option 5: Surface mounting Surface mounting Angle mounting... -
Page 8: Mount The Network
Mount the network Find a proper location to mount the networks. Mount the networks onto the car with the supplied screws. Connect the woofer/tweeter to the network Note • Match the “left”, “right”, “+” and “-” terminals correctly. Revised polarity may degrade sound quality. -
Page 9: Product Information
Amplifier Woofer Tweeter 4. Product information Model Speaker type RMS power (Watts) Peak music power (Watts) Sensitivity (dB/W/m) Frequency response (Hz) Impedance (ohms) Magnet mass (Oz) Black White lined Black White lined Black White lined CSP550 13cm, 2-way component speaker 210W 90dB 40-35kHz... -
Page 10: Troubleshooting
To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, go to the Philips web site (www.philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. Name of the Parts...