Scag Power Equipment V-Ride XL Series Operator's Manual page 26

R
Figure 4-8. Deck Height Range Adjustment Pin
4. Remove belt guard from the cutter deck.
5. Release tension in the idler arm. See Figure 4-9.
Figure 4-9. Deck Drive Belt Tension Release
6. Remove the deck drive belt from upper pulley.
See Figure 4-10.
7. Reinstall the deck drive belt on the lower pulley. See
Figure 4-10.
LIMIT PIN
RELEASE TENSION
HERE
22
2"- 5" CUTTING
HEIGHT
Figure 4-10. Deck Drive Belt Pulley
8. Apply tension to the deck drive belt.
9. To adjust cutting height within the selected range
see Section 4.15.
Section 4
3"- 6" CUTTING
HEIGHT