Related Manuals for Hammond Manufacturing NWC Series
Summary of Contents for Hammond Manufacturing NWC Series
- Page 1 BUL88453 INSTRUCTIONS FOR NWC - SERIES REV. PAGE OF Item Title Quantity Number NWC - CENTRE NWC - DOOR visit our website: www.hammondmfg.com NWC - REAR visitez notre site Web:...
-
Page 2: Important Safety Cautions
BUL88453 INSTRUCTIONS FOR NWC - SERIES REV. PAGE OF IMPORTANT SAFETY CAUTIONS NOTE : Read all instructions before installing and using the product. Installation and assembly must be performed by qualified personnel. Ensure that the floor/wall structure is able to withstand the weight of the cabinet while fully loaded. -
Page 3: Wall Mount Instructions
BUL88453 INSTRUCTIONS FOR NWC - SERIES REV. PAGE OF WALLMOUNT INSTRUCTIONS OPTIONAL : Remove front section of wallmount to allow for an easier install. INSERT AND THREAD EYEBOLT REMOVE TAMPER RESISTANT SCREW INTO RECESSED PIN AND LOCK WASHER 7/32" USE PROVIDED TAMPER RESIST ALLEN KEY REMOVE CENTRE SECTION... - Page 4 BUL88453 INSTRUCTIONS FOR NWC - SERIES REV. PAGE OF 8 LEVEL NIVEAU 16" TEMPLATE / MODÈLE ENGLISH Different wall materials require different types of screws. Mount back pan using 3/8" dia lag bolts and standard flat washers. FRANÇAIS Les différents matériaux de paroi murale nécessitent différents types de vis.
- Page 5 BUL88453 INSTRUCTIONS FOR NWC - SERIES REV. PAGE OF 8 REPLACE THE PIN INTO THE INSERT BOTTOM PIN INTO BOTTOM CENTRE SECTION THROUGH THE BUSHING HOLE RESTING THE CENTRE TOP OF THE UNIT SECTION ON THE NYLON SUPPORT STRIP REPLACE THE TAMPER RESISTANT UNSCREW THE EYEBOLT FROM SCREW AND LOCK WASHER THE RECESSED PIN AND REMOVE...
- Page 6 BUL88453 INSTRUCTIONS FOR NWC - SERIES REV. PAGE OF 8 REVERSE SWING DIRECTION INSTRUCTIONS...
- Page 7 BUL88453 INSTRUCTIONS FOR NWC - SERIES REV. PAGE OF 8 GROUNDING AND BONDING INSTRUCTIONS Included within optional grounding kit (GRDKIT01): 4 x 1/4-20 4 x 1/4-20 4 x 10-32 4 x 1/4" 4 x 10-32 4 x #10 Locking Nut Slotted Screw Flat Washer Locking Nut...
- Page 8 BUL88453 INSTRUCTIONS FOR NWC - SERIES REV. PAGE OF 8 Bonding Connection Main Protective Grounding When grounding the rack system or enclosure it is essential that the main protective ground is connected and secured first with its own nut before any bonding connections are made on top.