Care & Use - Outsunny 842-329V00 Assembly Instruction Manual

CARE & USE EN
Caring for your fire pit correctly will maintain its look and prolong usability
First Use
When you first use your fire pit, the unique double-wall airflow within the unit will take approximately 5-15
minutes to achieve full efficiency. The more evenly your fire burns inside your fire pit, the more prominent
the flame pattern showing the secondary combustion will appear.
Ash Removal
01. Empty the ashes after every fire to maintain optimal airflow and smokeless flames.
02. When the fire pit has completely cooled, brush the remaining ashes on the base plate into the holes
to collect in the ash pan below.
03. Lift the removable base plate with two fingers and a thumb using the two center holes to access the
ash pan.
04. Lift the ash pan out of the burn chamber and dispose of the ashes responsibly.
05. Clear all remaining debris, ash, and other particles from the burn chamber before replacing the ash
pan.
06. Replace the base plate on top of the ash pan with the domed side pointed up.
Storage
It's important to keep rain and snow out of your fire pit.
Prolonged exposure to moisture may result in increased staining or rusting. Due to extremely high tem-
peratures inside, the fire pit may show signs of staining/rust. This is normal and will not affect normal use.
Prolonged exposure to harsh weather will increase rust and discoloration.
Patina
Due to extremely high temperatures, discoloration of the fire pit will occur and is considered normal.
Stainless steel has an increased resistance to rust; however, it is not rust-proof.
Firewood
For best results, use dried and split hardwoods. Kiln-dried oak and juniper are excellent options.
Overfilling your fire pit above the upper vent holes will decrease efficiency and produce more smoke.