Xbox One Setup - ASTRO A50 Instruction Manual

XBOX ONE SETUP

1. Ensure the Mode Switch on the Base Station is set to Xbox.
2. Plug Micro end of the Micro USB cable into the Base Station and the USB end into the
Xbox One.
3. Plug TOSLink Optical Cable into the Xbox One Optical Port and plug the other end into
the Optical In Port on the Base Station.
4. Your A50 Wireless Headset comes pre-paired to the Base Station. However, you will
need to charge your headset before use. To do so, use both hands to reseat the
headset into the Base Station.
5. Once the Base Station is connected to the Xbox One, the Base Station will detect
automatically as a USB device and "Headset Assigned" will pop up.
6. Press the Xbox Button and navigate to the System Tab, and then "Settings."
7. Navigate to "Display and Sound," and then "Audio Output."
8. Ensure Headset Audio is set to "Headset Format Stereo Uncompressed."
9. Under Speaker Audio, ensure the Optical Audio is set to Bitstream out, and that
Bitstream Format is set to Dolby Digital.
10. To toggle to a new EQ preset, press the EQ Button until the desired preset is selected.
11. Before use, ensure the A50 Wireless is powered on.
12. That's it! Your A50 Wireless Headset and Xbox One are set up and ready to game!
A50 Wireless Headset Xbox FAQs 7