Table of Contents
Advertisement
Page 26
•L-------------~~------------__J
~
~
Refer to Pictorial 4 for the following steps.
( ) Connect the free lead
of
the resistor ca-
pacitor series extending from wafer 1
of
the
BAND . switch to lug 1 of tube socket V1
{8-2). Use sleeving.
(
)
Connect the free end
of
the long yellow
wire extending from wafer 3 of the BAND
switch to lug 5 of tube socket V1 {8-2).
( ) Connect the free end of the 2200
n
(red-
red-red) 1/2 watt resistor extending from
wafer
1
4 of the BAND switch to lug 4 of
terminal strip R {8- 5). Cut off any excess
lead length.
( ) Connect the free 1ead of the capacitor choke
combination extending from wafer 5 of the
BAND switch to lug 9 of tube socket V2
{8~2).
Cut off any excess lead length.
( ) Connect the free end of the yellow wire ex-
tending from wafer 6 of the .BAND switch
to ,lug 8 of tube socket V2 {8- 3).
( ) Route the coaxial cable extending from
wafer 2 of the BAND switch as shown and
connect the inner conductor to lug 1 of
phono socket BF (8"2). Connect the shield
to lug 2 of BF {8-1).
---
-~
--~
-
---------
---~~-~-
--
-~-
-~-
------
Advertisement
Table of Contents
