Table of Contents
Advertisement
Page 38
SHIPPING INSTRUCTIONS
tie securely with stout cord. Clearly print the
address on the carton as follows:
In
the event that your instrument must be re-
turned for service, these instructions should be
. carefully followed,
Be sur.e to return the complete Receiver with the
tubes in their sockets and the cabinet, Also,
if
you have the Model HRA-10-1 Crystal Cali-
brator, leave it plugged into the Receiver.
Wrap the equipment in heavy paper, exercising
care to prevent damage. Place the wrapped
equipment in a stout carton of such size that
at least three inches of shredded paper, ex-
'' celsior, or other resilient packing material
can be placed between all sides of the wrapped
equipment and the carton. Close and seal the
carton with gummed paper tape, or alternately,
. To: HEATH COMPANY
.Benton Harbor, Michigan
49022
ATTACH A LETTER TO THE OUTSIDE OF THE
CARTON BEARING YOUR NAME, COM,PLETE
ADDRESS, DATE OF
PURCHASE,A~ABRIEF
DESCRIPTION OF THE DIFFICULTYENCOUN-
TERED. Also, include your name and return
address on the outside of the carton. Preferably
affix one or more "Fragile" or "Handle With
Care" labels to the carton, or otherwise so mark
with a crayon of bright color. Ship by insured
parcel post or prepaid express; note that a
carrier cannot be held responsible for damage
in transit
if,
in HIS OPINION, the article is
inadequately packed for shipment.
WARRANTY
The Heath Company warrants that the parts supplied in its kits (except batteries) shall be free or"
defects in materials and workmanship,urider normal conditions of use and service. The obligation of
Heath under this warranty is limited to replacing or repairing any such part upon ~erification that it
is defective in this manner. This obligation is further limited to such defective parts for which Heath
is notified of the defect within a period bf ninety (90) days from the original date of shipment of the kit.
The obligation of Heath under this warranty does· not include either the fumishing or the exPense
of any labor in connection with the installation of such repaired or replacement parts. The obligation
of Heath with respect to transportation
ex~enses
is limited to the cost of shipping the repaired or re-
placement parts to the buyer, provided such repair or replacement comes within the terms of this
warranty.
The foregoirig warranty extends only to the original buyer and is expressly in lieu of all other war-
ranties, expressed or. implied. The foregoing warranty is further in lieu of all other obligations or
liabilities on the part of Heath and in no event shall the Heath Company be liable for any antici-
pated profits, consequential damages, loss of time or other losses incurred by the buyer "in connection
\Vith the purchase, assembly or use of the kit product or components thereof. l
· The foregoing warranty shall be deemed
~ompletely
void if acid core solder or /paste flux or other cor-
rosive solders or fluxes have been used in- assembling or repairing the kit product. Heath will not re-
place or repair any parts of any kit products in which such corrosive solders or fl_uxes have been used.
This warranty applies only to Heath products sold and shipped to points within the continental United
States and to APO and FPO shipments. Warranty· replacement for Heath products sold or shipped
outside the United States is on an f.o.b. factory basis. Contact the Heath authorized distributor in
your country or write: Heath Company, Intemational Division, Benton Harbor, Michigan, U.S.A.
HEATH COMPANY
---
~-
--
--
-
Advertisement
Table of Contents
