Pioneer FX-K99DK WG Service Manual page 10

@ Removing the Display Unit
1. Undo screws E to remove the bracket. Since the bracket
serves as a fulcrum about which the display unit can
turn, displace-the- unit sideways as indicated by the
arrow to release the unit. (Fig. 9)
2. Depress the solenoid lever in the direction of the arrow
to open the display unit. (Fig. 9)
4. The circuit board inside the display unit can be removed
by undoing screws F.
wW
Spring
Display Unit
Fig. 10
@ Removing Switch Unit (A)
1. Undo 2 screws to remove the solenoid unit (Fig. 11).
2. Undo 2 screws to remove the gear unit (Fig. 11).
3. Undo 2 screws to remove switch unit (A) (Fig. 12).
Fig, 12
11