Installation; Prepare The Rear Wall For Outside Back Exhaust; Attach The Mounting Plate To The Wall - Samsung BESPOKE ME21DG6500MT Installation Instructions Manual

3. INSTALLATION

INSTALLATION OVERVIEW
A. Prepare the Rear Wall (for outside back exhaust/
horizontal duct only)
B. Attach the Mounting Plate to the Wall
C. Prepare the Cabinet above
D. Mount the Microwave Oven
E. Connect the Ductwork (for outside top
exhaust/vertical duct only)
A. PREPARE THE REAR WALL FOR OUTSIDE
BACK EXHAUST
You need to cut an opening in the rear wall for outside
exhaust.
C L
• Read the instructions for outside back exhaust on
the REAR WALL TEMPLATE.
• Tape the REAR WALL TEMPLATE to the rear wall.
• Cut the opening, following the instructions on the
REAR WALL TEMPLATE.
CAUTION: Do not cut an opening in the rear wall if you
are installing the microwave with vertical duct or non-
vented ductless ventilation.
DE68-04108A-08_IM_ME18H704SFB_AA_EN.indd 15 DE68-04108A-08_IM_ME18H704SFB_AA_EN.indd 15
Step-by-step installation guide
B. ATTACH THE MOUNTING PLATE TO THE
WALL
Attach the plate to the wall using toggle bolts. At least
one wood screw must be used to attach the plate to a
wall stud.
1. Remove the toggle wings from the bolts.
2. Insert the bolts into the mounting plate through
the holes designated to go into drywall, and then
reattach the toggle wings so that ¾" of the bolt
protrudes beyond the wing.
15
2024-02-16 오전 9:30:38 2024-02-16 오전 9:30:38