Table of Contents
Advertisement
Installation
Accessories
Depending on the model that you have purchased, you are supplied with several accessories
that can be used in a variety of ways.
NOTE
DO NOT operate the microwave oven without the roller ring and turntable.
01 Roller ring, to be placed in the centre of the
microwave oven.
Purpose: The roller ring supports the
turntable.
02 Turntable, to be placed on the roller ring with
the centre fitting on to the coupler.
Purpose: The turntable serves as the main
cooking surface; it can be easily
removed for cleaning.
03 High rack, Low rack, to be placed on the
turntable.
Purpose: The metal racks can be used to
cook two dishes at the same time.
A small dish may be placed on the
turntable and a second dish on the
rack. The metal racks can be used in
grill, convection and combination
cooking.
04 Crusty plate, see pages 23 - 24.
Purpose: The crusty plate is used to brown
food better in the microwave or grill
combination cooking modes. It helps
keep pastry and pizza dough crisp.
Installation site
A
B
C
C
D
A. 20 cm above
B. 10 cm behind
C. 10 cm on the side
D. 85 cm of the floor
Turntable
• Select a flat, level surface approx. 85 cm above
the floor. The surface must support the weight of
the microwave oven.
• Secure room for ventilation, at least 10 cm from
the rear wall and both sides, and 20 cm from
above.
• Do not install the microwave oven in hot or damp
surroundings, such as next to other microwave
ovens or radiators.
• Conform to the power supply specifications
of this microwave oven. Use only approved
extension cables if you need to use.
• Wipe the interior and the door seal with a damp
cloth before using your microwave oven for the
first time.
Remove all packing materials inside the
microwave oven. Install the roller ring and
turntable. Check that the turntable rotates freely.
English 9
Advertisement
Table of Contents
