Table of Contents
Advertisement
Listening to Tape
Playback
DECK 1/2
® You can use normal, chrome and metal tapes.
® You can use either deck 1 or deck 2 for tape playback.
® This page shows an example using deck 1.
I
POWER
Switch on the power.
STANDBYO/ON
Press
4 EJECT
on deck
1,
and then insert the tape.
Insert the tape with the exposed tape
facing down.
Close the cassette holder.
Front side
REVERSE MODE
Press REVERSE
MODE
to
3
select the reverse mode.
Each time you press REVERSE MODE,
'one of the indicators will light up.
zt. : The deck plays one side only,
and then stop automatically,
to: The deck plays both sides, and
then stops automatically.
¢zto: The deck plays both sides 8
times, and then stop automati-
cally.
When you load tapes into both
decks; sequential playback wilt
be made. (See page 16)
4
\e
|
Press < or Pb.
b&: The forward side (front side ) will
play.
4: The reverse side will play.
To stop tape playback:
Press O.
When tapes are inserted in both decks:
Before proceeding step 4, press DECK 1/2 to select the deck you
want to play.
Usable deck
=
For your reference:
The deck automatically identifies the type of tape loaded.
15
Advertisement
Table of Contents
