Table of Contents
Advertisement
Quick Links
Floor Service Jack – 3-Ton Capacity (CLHMFSJ-60Q)
2311 South Park Rd. Louisville, Kentucky 40219
Email:
Web site:
sales@challengerlifts.com
www.challengerlifts.com
/
Office 800-648-5438
502-625-0700 Fax 502-587-1933
IMPORTANT:
READ THIS MANUAL COMPLETELY BEFORE
INSTALLING or OPERATING LIFT
12/11/2023
Advertisement
Table of Contents
Related Manuals for Challenger Lifts CLHMFSJ-60Q
Summary of Contents for Challenger Lifts CLHMFSJ-60Q
- Page 1 Floor Service Jack – 3-Ton Capacity (CLHMFSJ-60Q) 2311 South Park Rd. Louisville, Kentucky 40219 Email: Web site: sales@challengerlifts.com www.challengerlifts.com Office 800-648-5438 502-625-0700 Fax 502-587-1933 IMPORTANT: READ THIS MANUAL COMPLETELY BEFORE INSTALLING or OPERATING LIFT 12/11/2023...
-
Page 2: Table Of Contents
Owner and / or user must study and maintain for future reference the manufacturer’s instructions. Owner and / or user are responsible for keeping all warning labels and instruction manuals legible and intact. Replacement labels and literature are available from the manufacturer. CLHMFSJ-60Q Rev. 12/11/23... -
Page 3: Specifications
Model CLHMFSJ-60Q Specifications Capacity ........6,000 lbs. / 2,725 kg. Width......17 ¼ inches Chassis Length ....34 ⅜ inches Operation .........Manual / Hydraulic Maximum Lift Height .....23 ¾ inches Weight ......166 lbs. Minimum Saddle Height ..4 ¼ inches Component Identification CLHMFSJ-60Q Rev. 12/11/23... -
Page 4: Safety Instructions
11. Do not drive the vehicle off of the jack or attempt to move or dolly the vehicle at any time while the jack supports it. Failure to understand and obey this warning may result in personal injury and / or property damage. CLHMFSJ-60Q Rev. 12/11/23... -
Page 5: Operating Instructions
Each jack must be inspected immediately if subjected to an abnormal load or shock. Any jack which appears to be damaged in any way, is found to be badly worn, or operates abnormally shall be removed from service until necessary repairs are made. CLHMFSJ-60Q Rev. 12/11/23... -
Page 6: Structural Inspection
3. Remove the hydraulic oil fill plug, located beneath the hole in the cover plate on the frame of the jack. Removal requires a 7/16” hex socket wrench with 6” extension. Make sure the area around the hydraulic oil fill plug is clean and dry before removing the hydraulic oil fill plug. CLHMFSJ-60Q Rev. 12/11/23... -
Page 7: Troubleshooting
Release open, turn the pump handle clockwise until tight. Overloaded, use larger capacity jack. Fails to hold load ..........Release open, turn the pump handle clockwise until tight. Oil leaks ............... Hydraulic oil fill plug loose, tighten hydraulic oil fill plug. Reservoir is overfilled. CLHMFSJ-60Q Rev. 12/11/23... -
Page 8: Notes
Model CLHMFSJ-60Q Notes P.N. 670-90848...