Hoshizaki KML-325MAJ Instruction Manual page 17

12) Secure bin control cover and capillary ring in their correct positions and secure with the
2 thumbscrews removed in step 11.
13) Continue routing the bin control cable up into the control box. See Fig. 7.
IMPORTANT! Care should be taken when routing the bin control cable to avoid
moving objects (fan blade) and hot refrigeration piping (discharge line).
14) Connect the bin control cable connector to the control board red K4 connector.
See Fig. 8.
15) Secure the bin control cable with nylon ties.
16) Replace the control box cover in its correct position and secure.
Fig. 7
Fig. 8
Control Box
Bin Control
Wire Harness
Control Board
Control Board Red K4 Connector
17