System Requirements - ZyXEL Communications NWD-370N Quick Start Manual

3.1 Note for Windows XP Users
If you want to use WZC, either disable the ZyXEL utility (if you
already installed it) or just install the driver.
• To disable the ZyXEL utility, right-click the
Use Windows Zero Configuration. To activate the ZyXEL
utility again, double-click the
To install the driver only, select Driver only.

System Requirements

Before installation, make sure you have a computer with the
following:
• Pentium II 300 MHz or above
• A 32-bit (v2.2) PCI slot
• A minimum of 20 Mb available hard disk space
• A minimum of 128 Mb RAM
• A CD-ROM drive
• Windows 2000 or Windows XP
ENGLISH
icon and click OK.
12
icon and select