Safety - Pride Pursuit 2 Owner's Manual

PRODUCT SAFETY SYMBOLS
The symbols below are used on the scooter to identify warnings, mandatory actions, and prohibited actions. It is
very important for you to read and understand them completely.
NOTE: There are more warnings identifi ed and explained in the Consumer Safety Guide that is included with
your scooter. Please become familiar with all the warnings and safety information found in the Consumer
Safety Guide and refer to this resource often.
Read and follow the information in the owner's manual.
or
or
MODEL #
Scooter information label
4
I . S A F E T Y
Manufactured in
Indicates UNOCCUPIED scooter securement points.
or or
Battery Set Confi guration:
+ = Positive (Red) Terminal Post
- = Negative (Black) Terminal Post
Connect Red wires to Red Positive (+) Terminal Posts.
Connect Black wire to Black Negative (-) Terminal Posts.
Fully charge batteries before operating.
Remove key from an unattended Scooter.
Does not meet ISO 7176-19 standards for occupied
transport in a motor vehicle. When travelling in a motor
vehicle, do not sit in your scooter.
SC7132