Troubleshooting - Danby DDR060BMP2WDB Owner's Manual

TROUBLESHOOTING

Appliance will not operate
• Plug is not fully inserted into the wall outlet
• Blown fuse or circuit breaker
• Ambient humidity is lower than the set humidity
• Bucket is full or is not in the proper position
Insufficient dehumidifying
• Air filter is dirty
• Blocked air flow
• Appliance size is too small for application
• Ambient humidity is lower than the set humidity
Noise
• Air filter is dirty
• Bucket is not in proper position
• Floor surface is not level
Odors
• Formation of mold or mildew on internal wet surfaces
• Place an algaecide tablet in the water bucket
Water on floor
• Hose connection is loose
• Drain cover has been removed
Frost build up
• When ambient temperature is below 5°C (41°F) frost may form
• The appliance will defrost automatically during which the compressor temporarily shuts off while the
fan continues to operate. Once the defrost process is finished, the appliance will resume its previous
operational settings
16