Table of Contents
Advertisement
Operation / Care and maintenance
EN
EN
After use
1. Press the on/off switch (4) for 1 second to turn off the product. Ensure that the
temperature indicator (2) and the power indicator (3) go out.
2. Place the glue gun on a stable, level surface by using its stand holder (9)
when not in use.
WARNING!
Hot surface. Risk of scalding!
3. Allow the hot glue gun to cool down for at least 15 minutes.
4. Check, clean and store the product as described below.
The golden rules for care
WARNING!
Always switch the product off and let the product cool down before
performing inspection, maintenance and cleaning work!
1. Keep the product clean. Remove debris from it after each use and before
storage.
2. Regular and proper cleaning will help ensure safe use and prolong the life of
the product.
3. Inspect the product before each use for worn and damaged parts. Do not
WARNING! Only perform repairs and maintenance work according to
specialist!
General cleaning
1. Clean the product with a damp cloth and pH-neutral soap. Use a brush for
areas that are hard to reach.
2. In particular clean the air vents after every use with a cloth and brush.
3. Remove stubborn dust with high pressure air (max. 3 bar).
22
MNL_Greatstar_3.6V Glue Gun_V3_230526.indd 22
TTB958GLG by TITAN
5/26/23 2:44 PM
Advertisement
Table of Contents
