Table of Contents
Advertisement
Before you start
EN
Stand holder
Glue stick
WARNING! Always use the correct glue stick according to the
intended use!
Observe the technical requirements of this product (see section
purchasing and using the glue stick (12)!
Insert the glue stick
1. Check the size of glue stick (12) is
between 6.8-7.5 mm in diameter.
2. Align and insert the glue stick (12) into the
feeding channel (5) until it stops (Fig. 3).
WARNING! Do not try to remove the used glue stick (12) from the
feeding channel (5). Once used, a glue stick (12) must be used up
completely.
14
MNL_Greatstar_3.6V Glue Gun_V3_230526.indd 14
9
Fig. 1
TTB958GLG by TITAN
9
Fig. 2
5
Fig. 3
12
5/26/23 2:44 PM
Advertisement
Table of Contents
