Table of Contents
Advertisement
TTB958GLG by TITAN
Built-in battery
Charging the built-in battery
The built-in battery has been shipped in a low charge condition. Charge it fully
1. To charge the built-in battery, align and insert the type-C plug (11b) of the
charger cable (11) to the type-C port (7) of the product (Fig. 4, step 1), then
align and insert the USB plug (11a) of the charger cable (11) to the USB port
(10b) of the power adaptor (10) (Fig. 4, step 2).
2. Plug the power adaptor (10) into a plug socket.
WARNING! Check the voltage! The voltage must comply with the
information on the rating label!
3. The charging process will begin:
• Charging: The charging status indicator (3)
turns red (Fig. 5).
• Fully charged: The charging status indicator
(3) turns green and the charging time is
approx. 3 - 5 h.
4. Remove the power adaptor plug (10a) from
the power supply on completion of charging.
5. Remove the charger cable (11) from the
product.
MNL_Greatstar_3.6V Glue Gun_V3_230526.indd 15
11b
1.
7
11
Fig. 4
Before you start
11a
10
2.
10b
3
Fig. 5
EN
10a
15
5/26/23 2:44 PM
Advertisement
Table of Contents
