Seagate FireCuda Special Edition PCIe Gen4 NVMe SSD + Heatsink Installation Manual page 9

secured in place.
10. Slide the faceplate back into place.
Op onal RGB LED connec on
A. Attach the 5V addressable RGB cable to the connector under the heatsink.
B. Connect the other end of the cable to the 5V addressable header on the
motherboard. The power pin (marked with a triangle) must be connected to the 5V
pin 1. Refer to your motherboard documentation for detailed instructions on how to
connect RGB capable components to your motherboard. Incorrect connection can
damage the RGB connector on the heatsink as well as the computer's LED function.
FireCuda Special Editio n SSD 10/19/22 9