Seagate FireCuda Special Edition PCIe Gen4 NVMe SSD + Heatsink Installation Manual page 7

Install FireCuda Special Edi on SSD
1. Before installing FireCuda Special Edition SSD, power down your computer and unplug any cables
attached to it.
2. Open the case or cabinet.
3. If an existing SSD drive is installed in the M.2 PCIe slot you intend to use for FireCuda Special Edition
SSD, you'll need to remove it.
4. Power on your computer.
5. Access the BIOS setup while the computer is booting. Ensure that a PCIe device is set in the BIOS boot
sequence or boot priority list.
6. Power down the computer and locate the M.2 PCIe slot on your motherboard.
Note — Some motherboards have a pad installed in the M.2_PAD space by default.
This pad can be removed to ensure a better fit for the SSD.
FireCuda Special Editio n SSD 10/19/22 7