FLIR GF3 Series Getting Started page 17

3 EN-US English
5. button (Preview/Save).
The button has the following functions (not applicable to video clips and
video sequences):
• To preview an image before saving it, push and release the button.
• To save an image directly, push and hold the button for more than 1
second.
6. A/M button (Auto/Manual).
The A/M button has the following functions:
• Push and release the button to change the image adjustment method be-
tween Auto, Manual, and HSM.
Note HSM mode does not apply to the FLIR GF309.
• Push and hold down the button for more than 1 second to calibrate the
camera.
Note This is typically not needed during normal operating procedures.
7.
The
When an image is in live mode:
• To adjust the focus, push the button left/right.
• To autofocus, push the center of the
When an image is in preview or saved mode:
• To adjust the zoom, push the
8. Hand strap.
9. Focus ring on the infrared lens.
10. Infrared lens.
#T810142; r. AB/55671/55671; mul
button.
button has the following functions:
button.
button left/right.
9