Table of Contents
Advertisement
Available languages
Available languages
3 EN-US English
5.
Push the temperature range button, then do the following:
5.1.
Move the joystick up/down to choose a suitable temperature range
for your object.
5.2.
Push the temperature range button to confirm and leave the setup
mode.
6.
Aim the camera towards the target of interest.
7.
Autofocus the camera by pushing the center of the
8.
If there is a gas leak, and the gas is one of the gases that the camera can de-
tect, you will now see the leak on the screen. The leak will resemble smoke
plume emanating from the point of the leak.
9.
To start recording a video clip, push the
10. To stop recording a video clip, push the
11. To move the video clip to a computer, do one of the following:
•
Remove the SD Memory Card and insert it in a card reader connected to
a computer.
•
Connect a computer to the camera using a USB mini-B cable.
12. Move the video clip from the card or camera, respectively, using a drag-and-
drop operation.
#T810142; r. AB/55671/55671; mul
button.
button again.
button.
7
Advertisement
Table of Contents
