Page 3
Text section with Technical Data, important Safety and Working Hints and description of Symbols 4100 470 869 - M18BLIDR, M18BLIDRC.indd 3 4100 470 869 - M18BLIDR, M18BLIDRC.indd 3 11.05.2023 10:30:01 11.05.2023 10:30:01...
Page 4
Remove the battery pack before starting any work on the machine. Vor allen Arbeiten an der Maschine den Wechselakku herausnehmen click 4100 470 869 - M18BLIDR, M18BLIDRC.indd 4 4100 470 869 - M18BLIDR, M18BLIDRC.indd 4 11.05.2023 10:30:01 11.05.2023 10:30:01...
Do not dispose of used battery packs in the household refuse recommended, such as dust mask, protective gloves, sturdy or by burning them. Milwaukee Distributors off er to retrieve non-slip footwear, helmet and ear defenders. old batteries to protect our environment.
load or extreme temperatures. In case of contact with battery Practice with various fasteners, noting the length of time acid wash it off immediately with soap and water. In case required to reach the desired torque. of eye contact rinse thoroughly for at least 10 minutes and Check the tightness with a hand-torque wrench.
Use only Milwaukee accessories and Milwaukee spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents (see our list of guarantee/service addresses). If needed, an exploded view of the tool can be ordered.
EC DECLARATION OF CONFORMITY GB-DECLARATION OF CONFORMITY We declare as the manufacturer under our sole responsibility We declare as the manufacturer under our sole responsibility that the product described under “Technical Data” fulfi lls all that the product described under “Technical Data” fulfi lls all the the relevant regulations and directives listed below and that listed below relevant regulations and that the following designated the following harmonized standards have been used.
Need help?
Do you have a question about the M18 BLIDRC and is the answer not in the manual?
Questions and answers