Table of Contents
Advertisement
en Cookware test
Product information
Production number 1
Production number 2
a The first four displays provide the product informa-
tion. To call up the individual displays, touch the
control panel.
Touch
to access the basic settings.
3.
and light up as a presetting.
a
Cookware test
23 Cookware test
The quality of the cookware has a major influence on
the speed and the result of the cooking process.
You can use this function to test the quality of the cook-
ware.
Before the test, ensure that the size of the cookware
base corresponds to the size of the cooking zone be-
ing used.
Access is via the basic settings. → Page 22
23.1 Carrying out Cookware test
As a single cooking zone, the flexible cooking zone is
set in such a way that only the individual item of cook-
ware is checked.
At room temperature, place the cookware with ap-
1.
prox. 200 ml water in the centre of the cooking zone
that best fits the base of the cookware in terms of
size.
Call up the basic settings and select .
2.
Power limitation
24 Power limitation
You can use this function to set the total power of the
hob.
The hob is set at the factory. You can find the max-
imum power of the hob on the rating plate. You can
use this function to adjust the configuration to the re-
quirements of each electrical installation.
To ensure that this set value is not exceeded, the hob
automatically distributes the available power as needed
between the cooking zones that are switched on.
Home Connect
25 Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
24
Touch
4.
Display
pears.
.
Select the required setting in the settings area.
5.
.
Touch and hold
6.
a The settings are saved.
22.3 Discarding changes to the basic
settings
Touch
▶
a All changes are discarded and not saved.
Touch the settings area. The
3.
the cooking zones.
a The test is running.
a After 10 seconds, the result appears in the cooking
zone displays.
23.2 Checking the result
You can see what the result means for the quality and
speed of the cooking process in the following table.
Result
The cookware is not suitable for the cooking zone
and therefore does not heat up.
The cookware is taking longer to heat up than ex-
pected and cooking is not progressing as well as
it ought to.
The cookware is heating up correctly and cooking
is progressing well.
To activate this function, touch the settings range.
While this function is activated, the output of each
cooking zone may temporarily fall below the nominal
value. In order to not exceed this set value, the hob
automatically distributes the available power as needed
between the cooking zones that are switched on . The
appliance regulates and selects the highest power level
automatically.
You can find out how to do this in the "Basic settings"
section → Page 22
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tip: Please also follow the instructions in the
Home Connect app.
repeatedly until the desired setting ap-
for 4 seconds.
.
display flashes in
Advertisement
Table of Contents
