Installation Instructions - Magic Chef MCSDRY24W1 User Manual

INSTALLATION INSTRUCTIONS

Install the clothes dryer according to the manufacturer's instructions and local codes. The dryer must be
installed by a qualified installer or service person.
WARNING: Risk of Fire
DO NOT install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is
installed, it must be of a specific type identified by the manufacturer as suitable for use with clothes dryers.
Flexible venting materials are known to collapse, be easily crushed, and trap lint. These conditions will
obstruct clothes dryer airflow and increase the risk of fire.
To reduce the risk of severe injury or death, follow all installation instructions.
• Save these instructions.
• Before contacting a local Authorized Service Provider for the installation of the dryer, check the
information in the user manual to make sure that the electrical installation and water outlet is suitable.
If they are not, call a qualified electrician and/or plumber to have the necessary adjustments made.
• It is the customer's responsibility to prepare the dryer's installation place, as well as the electricity and
waste water installation. Before installation, check the dryer for damage. If damaged, do not have it
installed. Damaged products may endanger your health.
• Install the dryer on a stable and flat surface.
• Install the dryer in a dust-free environment where the air ventilation is good.
• The clearance between the dryer and the floor should not be reduced with objects such as carpets,
wood or tape.
• DO NOT block the ventilation grills found on the bottom front of the tumble dryer.
• The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on
the opposite side of the tumble dryer, in such a way that blocks the full opening of the tumble dryer
door.
• Once the dryer has been installed, the connections must remain stable. When installing the dryer,
make sure that the rear surface is not leaning on or pushing anything (e.g., water tap, electric socket).
• The operating temperature of the dryer is 40°F~ 95°F (5°C ~ 5°C). If operated out of this temperature
range, the performance of the dryer may be affected negatively and the product could be damaged.
• Be careful when moving the product and have someone assist you due to the weight of the product.
ALWAYS wear safety gloves.
• The dryer should be installed against a wall where it will not be a trip hazard.
• When the product is placed on a stable surface, use a water level to check if it is fully stable. If not,
adjust the feet until it becomes steady. Repeat this process every time you relocate the product.
• The dryer should be placed on a stable surface and leveled using the adjustable feet and a bubble
level. Be sure that the unit is level and steady when installing or after moving the unit.
• DO NOT place the dryer on the power cable.
• Install the clothes dryer according to the manufacturer's instructions and local codes.
9