Sony clie PEG-N610C Operating Instructions Manual page 127

Advanced HotSync
5
Adjust the following options as needed.
• Serial Port: Identifies the port for the modem. If you are unsure of the
port assignment, look at the Modem Properties in the Windows
Control Panel.
• Speed: Determines the speed at which data is transferred. Try the "As
Fast As Possible" rate first, and then adjust downward if you
experience problems. This setting allows the Palm Desktop for CLIE
software and your CLIE handheld to find and use the fastest speed.
• Modem: Identifies the modem type or manufacturer. Refer to your
modem manual or face plate for its type or settings. If you're not sure
of your modem type or your modem doesn't match any that appear in
the list, select Hayes Basic.
• Setup String: Identifies the setup string for your particular modem.
Not all modems require a setup string. Refer to your modem manual
and enter a setup string if recommended by the manufacturer.
6
Click OK.
Preparing your CLIE handheld
Follow the procedures below to prepare your CLIE handheld for a modem
HotSync operation.
1
Rotate the Jog Dial navigator to select HotSync and then
press the Jog Dial navigator. Or tap the HotSync
the Application Launcher screen.
The HotSync dialog box appears.
2
Tap Modem.
Chapter3
Exchanging and updating data using a HotSync
®
operations
Continued on next page
®
operation
icon on
127