ZyXEL Communications PLA-470 User Manual page 83

Figure 50 Electromagnetic Interference (EMI)
50-60mbps
HOMEPLUG AV BITRATE
APPLIANCE WITHOUT EMI FILTER
APPLIANCE WITH EMI FILTER
Wall-mounting Instructions
Complete the following steps to hang your PLA-400/400 v2/401/401 v2/402 v2/470/470 v2/
491 on a wall.
See Table 17 on page 79
place them.
1 Select a high position on a sturdy wall that is free of obstructions.
2 Drill two holes for the screws. The distance between the centers of the holes is listed in
the product specifications appendix.
Be careful to avoid damaging pipes or cables located inside the wall when
drilling holes for the screws.
3 Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm
between the heads of the screws and the wall.
4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of
the PLA-4xx with the connection cables.
5 Align the holes on the back of the PLA-4xx with the screws on the wall. Hang the PLA-
4xx on the screws.
PLA-4xx Series User's Guide
HAIR DRYER
HAIR DRYER
CONNECTED
DISCONNECTED
NO EMI FILTER
20-30mbps
for the size of screws to use and how far apart to
Appendix A Product Specifications
HAIR DRYER
CONNECTED
WITH EMI FILTER
50-60mbps
46-56mbps
83