If two guide plates are used to guide the air flow, Figure 12 shows how they are connected to the
mounting bracket.
Requirements for mounting one flow guide plate:
•
2x Air flow guide plate
•
4x hexagonal tap bolt m5 x 16
•
8x washer m5
•
4x lock nut m5
Figure 12 Connecting two air flow guide plate to mounting bracket
When exhaust guide plates are used in combination with an exhaust grille, the above mounting
bracket cannot be used. In this case, the guide plates must be used the other way around, whereby
they must be mounted to the exhaust grille with tyraps.
Page 19 of 32