Cleaning; Self-Cleaning Function; Housing; Storage - Kompernass DB 1800 A1 Operating Instructions Manual

Cleaning

Self-cleaning function

1) Fill the water tank to the "MAX" marking .
2) Insert the plug in the mains power socket .
3) Move the temperature control to the "MAX" position to switch the steam iron
on and set the temperature .
4) Turn the steam control
safety reasons the steam control
would cause water to drip from the sole of the iron
5) Hold the steam iron horizontally over a suitable container .
6) As soon as the required temperature is reached, steam and boiling water will
exit the holes in the sole of the iron
flushed out .
7) When no more water/steam comes out of the iron sole, set the steam control
to
the iron
8) Allow the iron to cool down before putting it away .

Housing

►
►
CAUTION – PROPERTY DAMAGE!
►
■
■

Storage

■
■
DB 1800 A1
3
. Iron over a towel or an old piece of cloth a few times to dry the sole of
thoroughly .
0
WARNING – RISK OF ELECTRIC SHOCK!
Remove the plug before cleaning the device . There is a risk of electric shock!
WARNING – RISK OF INJURY!
Allow the appliance to cool down before cleaning it! Otherwise, there is a
risk of burns!
Do not use abrasive, aggressive or chemical cleaning agents! They can
damage the surface and also lead to irreparable damage to the appliance .
Clean the housing with a soft, dry cloth only .
Clean the sole of the iron
detergent .
Empty any remaining water from the water tank .
Store the cooled-down appliance in a clean, dust-free and dry location .
to "SELF CLEAN" and keep it in this position . For
does not engage in this position, as this
3
. Any impurities that may be present are
0
using a damp cloth and a mild, non-scouring
0
continuously .
0
GB │ MT
3
│ 53 ■