Steam ironing
■
NOTE
►
Ironing with steam blast
The steam blast function is especially suitable for smoothing difficult-to-reach
parts of a garment .
1) Raise the steam iron slightly .
2) For a steam blast, press the steam blast button
Temporarily setting the steam iron down
►
1) Move the temperature control
2) Stand the steam iron only on the base
Taking the steam iron out of service
1) Remove the power plug from the mains power socket .
2) Empty the water tank and clean the sole of the iron
3) Place the cooled-down steam iron on the base
■
52
│
GB │ MT
Set the steam control
The temperature control
no steam will be produced .
After steam ironing or when no more steam is needed, set the steam control
to the
position . Otherwise, water could drip from the sole of the iron
CAUTION! RISK OF FIRE!
Never leave a hot steam iron unattended if it is switched on or connected
to the mains power supply .
to the
position .
3
must be set to at least the
6
to the "MIN" position .
6
.
9
setting . Otherwise
.
4
.
0
.
9
3
.
0
DB 1800 A1