Amana BX22S5W-P1196708WW Owner's Manual page 6

5/16" screws
Top hinge
Door closure
(some models)
5/16"
hex nut
Center hinge
Phillips screws
Plug
(some models)
Bottom hinge
3/8"
screws
CAUTION
Protect soft vinyl or other flooring with cardboard, rugs
or other protective material to avoid property damage.
9. Reverse doors as necessary by performing the
following steps:
• Remove button plugs from opposite side of
refrigerator cabinet using putty knife covered with
masking tape. Insert button plugs in holes left from
hinge removal.
• Remove freezer door internal support rod located
underneath freezer handle. Reinstall internal
support rod in hinge hole on opposite side of door.
10. Rehang doors by replacing bottom, center, and top
hinges, along with freezer and refrigerator doors on
opposite side of refrigerator performing steps 2-8 in
reverse order.
• Use a penny at top to space door
from cabinet.
• Handle side of door should be approximately
1
/ " (3 mm) higher than hinge side.
8
Center hinge
pin
Center hinge
bracket
Door closure
(some models)
11. Replace freezer door handles.
Models with freezer handle cap.
• Mount handle to opposite side of door using
• Angle front edge of handle cap downward toward
Models without freezer handle cap.
• Place hinge shim on non-hinge side of door. Large
3
/ " (18 mm)
4
• Replace freezer handle on non-hinge side of door
6
3/4"
(18 mm)
mounting screws removed in previous step.
back lip of freezer handle. Verify bottom tab on
freezer cap slides under rear lip of freezer handle.
Snap rear edge of handle cap in place. Place 2
button plugs in empty mounting holes.
Freezer
handle
hole in hinge shim must line up with hole created
from hinge reversal.
with screws previously removed.
1/8"
(3 mm)
Handle
cap
Screws
Freezer handle
shim
Hinge hole