Advertisement
[General]
[General]
[All Reset]
[Yes]
[No]
[APRX. Sensor]
[Off]
[On]
[Auto]
[Zoom Up]
[Original]
[Full]
[2X Scale]
[Self Calibration]
[Yes]
[No]
[Cal. Date:]
NOTE
•
Show [Cal. Date:] in which [Self Calibration] is done. The [Cal. Date:] will be based on the date that is shown in the OSD menu, it can be synced to the real time/date via internet (RJ45). Please
connect the monitor with internet before AC On if user want to get real time/date when doing [Self Calibration].
Reset all display and OSD setting to default value.
Exit this page.
Disable [APRX. Sensor] function.
Set [APRX. Sensor] close the panel power when user isn't in front of monitor.
Save the P-distance and enable [APRX. Sensor] on. The arrow mark will point to [On].
Keep image in normal resolution.
Scale up the resolution to 2048 x 1536.
Scale up the specific part of image.
Enable monitor test luminance and calibrate DICOM with color temperature according to OSD setting.
Exit this page.
Description
19
Advertisement
