1 Click MAINTENANCE in
the navigation panel and
then Device Mode.
2 Select Bridge and
configure a (static) IP
address subnet mask and
gateway IP address for
the ZyWALL's LAN, WAN,
DMZ and WLAN
interfaces.
3 Click Apply. The ZyWALL
restarts.
Skip to
Section 5
if you have
servers that you need to be
accessible from the WAN.
4 Internet Access Setup and Product Registration
1 Click the Wizard icon (
the Internet Access Setup link to open the Internet access
wizard.
Enter the Internet access information exactly as given to you.
If you were given an IP address to use, select Static in the IP
Address Assignment drop-down list box and enter the
information provided.
Note: The fields vary depending on what you select in the
Encapsulation field. Fill them in with the
information provided by the ISP or network
administrator.
Click Apply when you are done.
ENGLISH
) in the HOME screen and then
6