Troubleshooting - ZyXEL Communications ZyWall 35 Quick Start Manual

4 Use this screen to enable anti-
spam and select which traffic flows
the ZyWALL scans for spam. The
recommended traffic flows are
already selected. You generally
only need to select traffic directions
that have incoming e-mail from
outside e-mail servers.
5 Click Apply.
6 Click Close in the final screen to
complete the anti-spam wizard
setup.
7 Congratulations, you have
configured the ZyWALL to scan for
spam e-mail.
You can also use the anti-spam whitelist and blacklist to identify legitimate e-mail and spam. See the anti-
spam chapter in the User's Guide for details.

10 Troubleshooting

Problem Corrective Action
None of the LEDs Make sure that you have the power adaptor connected to the ZyWALL and plugged in to an
turn on. appropriate power source. Check all cable connections.
If the LEDs still do not turn on, you may have a hardware problem. In this case, you should
contact your local vendor.
ENGLISH
17