Kenwood UD-300 Service Manual page 54

UD-300
54
Fig. 13
Fig. 13
5 When the shift lever is raised to its limit by the play cam
gear cam, the selector arm hole and head chassis
assembly boss (A) are positioned as shown in the figure
below. The pinch roller does not touch the capstan, and
fast — forwarding takes place.
Fig. 14
STOP -> RWD
1 Press the <q key.
Fig. 15
F PLAY > CUE / RWD
R. PLAY > RWD
1 The solenoid is energized for 50 ms duling reverse play
to stop operation.
3 The solenoid is deenergized for 100 ms, then
reenergized for 150 ms to fast — forward.
RVS PLAY ~ CUE
1 The solenoid is energized for 50 ms dutng reverse play
to stop operation.
2 The solenoid is energized for 50 ms torotatte the head
into the reverse — transport position.
3 The solenoid is deenergized for
reenergizend for 300 ms to rewind.
100 ms, then