Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for IFM EIO344
Summary of Contents for IFM EIO344
- Page 1 Operating instructions Bluetooth mesh IO-Link adapter EIO344...
-
Page 2: Table Of Contents
EIO344 Bluetooth mesh IO-Link adapter Contents Preliminary note ............. -
Page 3: Preliminary Note
Bluetooth mesh IO-Link adapter EIO344 1 Preliminary note You will find instructions, technical data, approvals and further information using the QR code on the unit / packaging or at documentation.ifm.com. 1.1 Symbols used Requirement Instructions Reaction, result [...] Designation of keys, buttons or indications... -
Page 4: Safety Instructions
EIO344 Bluetooth mesh IO-Link adapter 2 Safety instructions • The unit described is a subcomponent for integration into a system. – The system architect is responsible for the safety of the system. – The system architect undertakes to perform a risk assessment and to create documentation in accordance with legal and normative requirements to be provided to the operator and user of the system. -
Page 5: Intended Use
All available functions can be accessed via moneo|blue APP. The APP is available for Android and iOS in the corresponding app store. The EIO344 has the function of IO-Link data storage. This enables a defective IO-Link device to be replaced quickly. -
Page 6: Restriction Of The Application Area
EIO344 Bluetooth mesh IO-Link adapter 3.1 Restriction of the application area The device is not suited for environments with particular requirements on mechanical stability (e.g. shock/vibration). The unit is intended for indoor use only. Observe the operating conditions. Ò Technical data documentation.ifm.com... -
Page 7: Function
Bluetooth mesh IO-Link adapter EIO344 4 Function 4.1 Connection possibilities The EIO344 has several connection possibilities, which also include various functions. 4.1.1 IO-Link connection and outputs This device has two IO-Link communication interfaces: M12 connector: • Power supply • Output pin 2 (connected through from the device) and digital output pin 4 •... - Page 8 EIO344 Bluetooth mesh IO-Link adapter Once Bluetooth mesh is set up, the EIO344 automatically establishes the connection to a base station (EIO404). The connection can be made directly to the base station or via several Bluetooth mesh IO- Link adapters EIO344.
-
Page 9: Electrical Connection
• Input for the IO-Link interface of the device Fig. 3: Electrical connection Output for digital and analogue signals Input for IO-Link parameter setting L+ (supply voltage EIO344 + device) OUT2 (connected through pin 2 of the IO-Link device) Not used OUT1 digital... -
Page 10: Mounting The Connector
EIO344 Bluetooth mesh IO-Link adapter 5.1 Mounting the connector To achieve the protection rating indicated in the data sheet: u Use IO-Link cable with IP class. u Connect the connector with the device. u Tighten the coupling nut. • Minimum tightening torque: 0.6 Nm (tightening by hand) •... -
Page 11: Indicators, Output Response And Troubleshooting
Bluetooth mesh IO-Link adapter EIO344 6 Indicators, output response and troubleshooting The indicator shows the current status of the unit via an LED. 6.1 LED indicators Colour Designation Interference display Green Operation indication Blue Bluetooth Fig. 4: 1: LED indicators 6.2 LED status indication, output response and troubleshooting... -
Page 12: Parameter Setting
EIO344 Bluetooth mesh IO-Link adapter 7 Parameter setting The parameters of this device can be set via 2 interfaces. It is possible to read information and make changes via IO-Link or Bluetooth. Assigned information and changes are possible for each interface. -
Page 13: Connecting The Base Station And Bluetooth Mesh Io-Link Adapter
Bluetooth mesh IO-Link adapter EIO344 7.3 Connecting the base station and Bluetooth mesh IO-Link adapter Step 1: u Use a PC with the required configuration software and an Ethernet interface. The IP is set up e.g. via the Bluetooth mesh IoT base station EIO404. - Page 14 EIO344 Bluetooth mesh IO-Link adapter -0.72 Step 4: u Select the new Bluetooth mesh IO-Link adapter found. w The Bluetooth mesh IO-Link adapter is registered with the base station -0.72 Ethernet local intranet Bluetooth Bluetooth mesh 7.3.1 Integrating a Bluetooth mesh IO-Link adapter outside the range of the...
-
Page 15: Data Storage For The Io-Link Device With Moneo|Blue
Bluetooth mesh IO-Link adapter EIO344 Step 2: u Get a key from the base station. Fig. 7: Ex. mobile device with moneo|blue Bluetooth Step 3: u Transfer the key retrieved from the base station to an active Bluetooth mesh IO-Link adapter in the network. -
Page 16: Device Validation And Data Storage
EIO344 Bluetooth mesh IO-Link adapter Parameter Description Possible values Validation / Data Stor- Supported IO-Link standard and behaviour of • No check and clear the IO-Link master when a new IO-Link device • Type compatible V1.0 device is connected to the port •... -
Page 17: Parameters And Commands
../btswrevision Bluetooth firmware version e.g. v0.22 ../hwrevision Hardware version e.g. AA ../producttext Product designation Bluetooth Mesh IO-Link Adapter ../vendor Manufacturer ifm electronic gmbh ../productname Product name EIO344 ../productcode Product code EIO344 ../devicename User-specific device name e.g. mesh_adapter01 Read only Read and write... -
Page 18: Adapter
EIO344 Bluetooth mesh IO-Link adapter 8.2 Adapter The following parameters / commands can be read / written with a suitable configuration tool (e.g. moneo|blue) or via the IoT core Access to the IoT core of the adapter is only possible via the EIO404 Bluetooth mesh IoT base station. -
Page 19: Bluetooth Le
Bluetooth mesh IO-Link adapter EIO344 8.3 Bluetooth LE Available data points: Name Description Value range Access ../bluetooth_name Station name of the unit (string with e.g. eio344_adapter01 max. 22 characters) ../securitymode Status of the security mode • 0: disabled NOTE! The security mode does not •... -
Page 20: Bluetooth Mesh
EIO344 Bluetooth mesh IO-Link adapter 8.4 Bluetooth mesh Available data points: Name Description Value range Access ../base_station_name Name of the Bluetooth mesh IoT base e.g. mesh_base station EIO404 to which the device is connected. ../last_seen Past duration that the adapter last report- •... -
Page 21: Switching Output
Bluetooth mesh IO-Link adapter EIO344 8.5 Switching output Available data points: Name Description Value range Access ../config Configuration of the parameters of the • 0: Auto - The values for fou1 and switching output bit_position are set automatically; if automatic configuration fails, the adapter flashes red •... -
Page 22: Io-Link Master
EIO344 Bluetooth mesh IO-Link adapter 8.6 IO-Link master Available data points: Name Description Value range Access …/mode Operating mode of pin 4 (US) of the • 0: Disabled - port deactivated port • 1: DI - digital input • 2: DO - digital output •... - Page 23 Bluetooth mesh IO-Link adapter EIO344 Applicable services: Name Description ../validation_useconnecteddevice Validate the IO-Link device...
-
Page 24: Io-Link Device
../vendorid IO-Link ID of the manufacturer e.g. 310: ifm electronic ../deviceid IO-Link ID of the IO-Link device e.g. 712: ifm pressure sensor, PV7003 ../productname Product name of the IO-Link device e.g. PV7003 ../serial Serial number of the IO-Link device e.g. - Page 25 Bluetooth mesh IO-Link adapter EIO344 • Mode IO-Link Event Qualifier: Event trigger 1 byte • 0x40: One-time event or warning (single shot) • 0xC0: Error disappeared • 0x80: Error appeared • Type IO-Link Event Qualifier: Event category 1 byte • 0x10: Notification •...
-
Page 26: Set-Up Of The Moneo|Blue Application
9.2 Connect a mobile device. u Activate Bluetooth data transmission on the mobile device. u Position the mobile device within the range of EIO344. u Select the requested EIO344. u Enter the access password 0000. You can find information about moneo|blue in the App description. -
Page 27: Copyright And Trademarks
Bluetooth mesh IO-Link adapter EIO344 10 Copyright and trademarks All trademarks and company names used are subject to the copyright of the respective companies. Bluetooth®: word mark and logos are registered trademarks of the Bluetooth SIG. Inc. Android®: Android, Google Play and the Google Play logo are trademarks of Google Inc. -
Page 28: Approvals And Certificates
EIO344 Bluetooth mesh IO-Link adapter 11 Approvals and certificates The EU declaration of conformity, approvals and country-specific certificates are available at: documentation.ifm.com Approval-related notes: Ò Packing slip... -
Page 29: Maintenance, Repair And Disposal
12 Maintenance, repair and disposal The unit is maintenance-free. u Contact ifm in case of malfunction. u Do not open the housing as the unit does not contain any components which can be maintained by the user. The unit must only be repaired by the manufacturer.