Page 1
Installation Instructions Universal process adapter RD52 E33340...
Page 2
► Grease thread and sealing (B) of the coupling nut (C) with paste (A). The paste must be suitable and ap- proved for the application and compat- ible with the elastomers used. ► Slip the coupling nut onto the sensor (D) from the bottom.
Page 3
(this corre- sponds to a maximum tightening torque of 35 Nm). Note: Further tightening may affect the sealing effect. ► Insert the unit in a universal process connection RD52. ► Tighten the coupling nut.