Snapper 6 Series Safety Instructions And Operator's Manual

Safety Instructions & Operator's Manual for
SCRAMBLER
HYDRO DRIVE
SERIES 6
I MODELS I
YZ18426BVE
YZ20486BVE
MODEL NUMBER EXPLANATION
I YIz 1181,
MODEL DESIGNATION ._1 I I
SYSo . 'M %%.
CUTTING WIDTH
21
;IBIVlEI
I I L ENGINE OPTIONS
ENGINE TYPE
ENGINE MODEL
SERIES DESIGNATION
Y - SCRAMBLER
E- Zero Turning Radius
I 18-16 HP Engine I B-BriggsEngine I V-OverHeadVaive 20 - 20 HP Engine I 42 - 42" Cutting Deck 48 - 48" Cutting Deck I 6 - Series Designation
E - Electric Start
Thank you for buying a SNAPPER Product! Before operating your SCRAMBLER, read this manual carefully and
pay particular attention to the "IMPORTANT SAFETY INSTRUCTIONS" on Pages 2 - 4. Remember that all power
equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in
accordance with the operating instructions and common sense!
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.
SNAPPERMcDonough,
GA., 30253 U.S.A.
COPYRIGHT (_ 2004
SNAPPER A DIVISION OF SIIqPMCITY _,'TFG INC
ALL RIGHTS RESERVED
MANUAL No. 5-0406 (I.R. 7/27/04)