The Domain Filters Page - Zoom 4506 User Manual

Filtering Policies
You can select one of the two filtering policies:
•
Allow all to pass except those that match the specified rules
•
Deny all to pass except those that match the specified rules
Filtering Rules
You can specify eight rules for each direction: inbound or outbound. For each rule,
you can define the following:
•
Source IP address
•
Destination IP address
•
Destination Port
•
Use Rule#
For the Source or Destination IP address, you can define a single IP address (4.3.2.1).
An empty field implies any IP address.
For Destination Port, you can define a single port (80) or a range of ports (1000-1999).
No prefix indicates both TCP and UDP are defined. Leaving this empty implies that all
port addresses apply.
Each Rule can be enabled or disabled individually.
You can use packet filters with scheduling rules for more access control flexibility.

The Domain Filters Page

You can use the Domain Filters page to enable or deny user access to specified URLs.
•
Domain Filter
Use to prevent users behind this device from accessing specific URLs.
Chapter 5: Using the Configuration Manager's Advanced Program 43