Zoom 4506 User Manual page 22

WPA-PSK/WPA2-PSK Authentication
We recommend this setting if all devices on your network support either WPA or
WPA2. Your router will automatically detect whether is should use WPA or WPA2.
When you select WPA-PSK/WPA2-PSK from the Authentication dropdown menu, the
Encryption field expands, as shown in the following figure.
Field Entry
Accept WPA-PSK/WPA2 PSK as the default value.
Authentication
Accept the default, TKIP/AES, which supports dynamic encryption
Encryption
keys using TKIP or AES algorithms. Select AES if you chose WPA-PSK/
WPA2-PSK for the authentication method. Select TKIP if you chose
WPA-PSK /WPA2-PSK for the authentication methods. Usually WPA
uses TKIP and WPA2 uses AES.
In the Preshare Key field, enter a value for the key. The maximum
Preshare Key
value is 42 characters. The minimum value is 8 characters.
Write your key in the space below for future reference, and then
enter it in the Preshare Key field:
— — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — —
WEP Authentication and Encryption
If you have devices on your wireless network that support only WEP (for example,
some gaming consoles), you will need to select WEP as your Authentication method.
When you select WEP from the Authentication dropdown menu, the Encryption field
expands, as shown in the following figure.
22 3G Wireless-N Travel Router User Guide