Remote Control (Wi-Fi) - Hoover HDIN 2L360PB Manual

16. REMOTE CONTROL (WI-FI)

This appliance is equipped with Wi-Fi
technology that allows the machine to be
remote controlled via an app.
Pairing the machine with the app
l
Download the Hoover Wizard app onto
your device.
The Hoover Wizard app is available
both for Android and for iOS tablets
and smartphones.
To discover all the details of the Wi-Fi
features, explore the app menus in
DEMO mode.
l
Make sure the router is turned on and
your smartphone/tablet is connected to
your home Wi-Fi network.
l
Turn on BLUETOOTH
smartphone/tablet (if available).
l
Open the app, create a user profile and
enroll the appliance,
instructions appearing on the device's
display
l
Turn on the dishwasher with the ON/OFF
button when instructed to do so in the
app.
l
Press "PROGRAMME
and hold down for 3 sec.; à indicator
lights P3 and P4 will both flash.
l
Press the "DELAY START" button and
hold down for 3 sec. within 60 sec. of the
previous step; the 3h-6h-9h indicator
lights will all flash simultaneously for 5
min.
l
Enter the password of your home WiFi
network in the app and complete the
procedure.
Successful enrollment
l
The 3h-6h-9h indicator lights will go off,
while the P3 P4 indicator lights will stay
on.
l
The machine is connected, and you can
now control your machine from the app.
Unsuccessful enrollment
If enrollment fails, or does not succeed
within 5 min.:
l
The 3h-6h-9h and P3 P4 indicator lights
will go out.
l
The machine will not be connected.
l
Repeat the enrollment procedure, holding
down the "DELAY START" button again.
For
"Enrollment App - Quick Guide" that
comes with your machine, also accessible
at the link : go.candy-group.com/am-dw
on your
Resetting the WiFi
Repeat the enrollment procedure in the
following the
event of problems or a change in your
home router password.
ENABLING REMOTE CONTROL
Whenever you want to use the machine
with remote control:
SELECTION"
l
Fill the dishwasher, add detergent, and
close the door.
l
Turn on the dishwasher.
l
Press "PROGRAMME SELECTION" and
hold down for 3 sec. à; the P3 P4
indicator lights will come on steady.
l
You may now use the app and remote
control the machine with your device.
99
more information, refer to the