Table of Contents
Advertisement
2. Due to the nature of the NAT implemented, only one user at a time can access the same
VPN server on the Internet through this device. This means that two private network users
cannot access the same VPN server locate on the public Internet simultaneously.
3. For details on setting up a VPN client, please refer to your system's documentation.
Routing Table
This device allows users to define the internal routing table to best integrate this router into the
current IP (sub) network.
Note: Defining a new routing requires more advanced TCP/IP knowledge. Any wrong routing
information may make the whole IP network unreachable, until it is corrected again. If
you don't have this information, please ask your network administrator for help.
To define a new routing table, please follow the directions listed below:
1.
Click Advanced Settings in the top column. Then click Service Setup.
2.
Click Static Routing.
Type the destination's IP address, the net mask, the Gateway IP, and Metric.
3.
Select "Yes" in the Private option, if you do not want the device to broadcast the
routing information (RIP).
Select "No", if you do want the device to broadcast the routing information to other
routers on the network.
4.
Click the Add button.
5.
A new static routing table has been defined.
Local Server
The Broadband Firewall Router offers support for hosting servers on your private network that
can be accessed from the public Internet. While the addresses on the Broadband Firewall
Router are not directly accessible by a computer on the Internet, the Broadband Firewall
Router allows for selective access by mapping incoming access requests for a particular
24
Advertisement
Table of Contents
