DeWalt DXCM805 Instruction Manual page 19

Procedure
Check safety valve
Inspect air filter
Drain tank
Check pump oil level
Change pump oil
Oil leak inspection
Inspect drive belt
Check drive belt tension
Check pulley/flywheel alignment
Check for unusual noise/vibration
Check for air leaks
Clean air compressor exterior
Remove tank from service
* To check for air leaks apply a solution of soapy water around joints. While air compressor is pumping to pressure and after pressure
cuts out, look for air bubbles to form.
** The pump oil must be changed after the first 20 hours of operation. Thereafter, when using full synthetic non-detergent air
compressor oil, change oil every 100 hours of operation or once a year, whichever comes first.
+ Perform more frequently in dusty or humid conditions.
++ For more information, call 1-888-895-4549 .
Maintenance Schedule
Daily Weekly
√
√+
√
√
√
√
√
√*
√
19
Monthly 1 Year or 100 Hours See Tank Warning
√**
√
√
√++