Data Transfer Procedure - Canon PARALLEL INTERFACE-30 Manual

Data Transfer Procedure
The procedure for data transfer, from connections to actual data trans-
mission, is summarized below. For details, refer to the page noted in
parentheses at the end of each step.
1 Make connections
2 Prepare typewriter
(page 2)
Connect the interface to both the typewriter
and personal computer.
(page 9)
Select the typewriter settings, character code
(Typestar 7 only), and line feed method.
3 Set typewriter to ONLINE mode (page 12)
4 Start data transmission
(page 14)
The typewriter will begin printing as soon as
data from the personal computer is received.
(If printout is abnormal, see page 22.)
5 Return typewriter to OFFLINE mode
(page 12)
When data transmission is complete, return
the typewriter to the OFFLINE mode.